Soomro I A, Pedapati S R, Awang M, Soomro A A, Alam M A, Bhayo B A. Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network. IJMSE 2022; 19 (4) :1-10
URL:
http://ijmse.iust.ac.ir/article-1-2709-en.html
Abstract: (7314 Views)
This paper investigated the optimization, modelling and effect of welding parameters on the tensile shear load bearing capacity of double pulse resistance spot welded DP590 steel. Optimization of welding parameters was performed using the Taguchi design of experiment method. A relationship between input welding paramaters i.e., second pulse welding current, second pulse welding current time and first pulse holding time and output response i.e, tensile shear peak load was established using regression and neural network. Results showed that maximum average tensile shear peak load of 26.47 was achieved at optimum welding parameters i.e., second pulse welding current of 7.5 kA, second pulse welding time of 560 ms and first pulse holding time of 400 ms. It was also found that the ANN model predicted the tensile shear load with higher accuracy than the regression model.
Full-Text [PDF 754 kb]
(5004 Downloads)
- Double RSW parameters are optimized to obtain maximum joint tensile shear strength
- Tempered martensite structure in FZ improved the joint tensile shear strength
- ANN and regression models are developed to predict tensile shear strength