Volume 6, Issue 4 (Autumn 2009 2009)                   IJMSE 2009, 6(4): 52-60 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

A. Bahrami, M. R. Hosseini, M. Pazouki. THE SHAKING TABLE CONCENTRATOR: INFLUENCE OF TABLE PARAMETERS ON MANGANESE CONCENTRATION. IJMSE 2009; 6 (4) :52-60
URL: http://ijmse.iust.ac.ir/article-1-214-en.html
Abstract:   (26667 Views)

Abstract:

point of view. In this study, a shaking-table was used for concentrating a manganese ore sample from the Ghasem Abad

area in Kerman, Iran. Experiments were designed by using L

The influence of each variable and their interactions on the operation of the device was studied. The variables under

investigation were: table slope, table frequency, water flowrate, feed rate, and particle size. The manganese

concentrate grade, recovery, and separation efficiency were used as response variables. It was shown that water

flowrate, table slope, feed rate, and particle size are the significant variable on concentrate grade while, all the

variables influence manganese recovery. Also, water flowrate, table slope, and table frequency have an important

effect on manganese separation efficiency. Finally, three mathematical models were presented to predict the values of

each response variables.

Among all gravity concentration methods, the shaking-table is the most effective one from the metallurgical8 Taguchi design with five variables, each in two levels.
     
Type of Study: Technical Note |

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb