Abstract: (16097 Views)
In the present study, Zirconium modified aluminide coating on the nickel-base superalloy IN-738LC was first created by high activity high temperature aluminizing based on the out-of-pack cementation method. Then, Zr coatings were applied to simple aluminide coatings by sputtering and heat treatment in order to study the effect of Zr on the coating microstructure and oxide spallation. Microstructural studies were conducted by using scanning electron microscopy (SEM), Energy Dispersive X-ray Spectrometry (EDS), and x-ray diffraction (XRD) microanalysis. The results indicated that zirconium modified aluminide coating, like aluminide coating, has a two-layer structure including a uniform outer layer of NiAl and an interdiffusion layer in which zirconium is in a form of solid solution in the coating. Furthermore, the 300nm Zr-coated NiAl demonstrated an excellent scale adhesion, a slow oxidation rate and lower amounts of some other elements such as Ti and Cr in its oxide layer leading to a pure aluminide oxide layer.
Full-Text [PDF 2188 kb]
(3868 Downloads)
- Zr-doped NiAl coatings were prepared by aluminizing and then Zr sputtering.
- Zr decreased Al outward diffusion during oxidation and resulted in less oxide layer thickness.
- The coating of 300 nm Zr-NiAl exhibits the best spallation resistance.
Type of Study:
Research Paper |
Subject:
Ceramics