Volume 12, Number 1 (march 2015 2015)                   IJMSE 2015, 12(1): 28-34 | Back to browse issues page



DOI: 10.22068/ijmse.12.1.28

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Shalchian H, Farbod A, Beygi H, Sajjadi S A. COMBUSTION PERFORMANCE OF Ni-COATED AND UNCOATED HIGH ENERGETIC ALUMINUM NANOPARTICLES. IJMSE. 2015; 12 (1) :28-34
URL: http://ijmse.iust.ac.ir/article-1-764-en.html

Abstract:   (1891 Views)
High energetic aluminum nanoparticles are mainly used as additive in solid rocket propellants. However, fabrication of these aluminized energetic materials is associated with decreasing the burning rate of propellants due to problems such as oxidation and agglomeration of nanoparticles. In this study, to improve combustion performance of aluminum nanoparticles, coating by metallic Ni shell was studied. Nickel coating of aluminum nanoparticles was performed through electroless deposition (ED) subsequently, morphology and chemical composition of Ni-coated nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). These studies show that a uniform Ni layer with a thickness of 10nm is coated on the surface of Al nanoparticles. Thermal analysis of uncoated and Ni-coated aluminum nanoparticles was done using differential thermal analysis (DTA) and thermo gravimetric analysis (TGA). The results of thermal analysis indicate that, coating the aluminum particles by Ni, leads to improvement in combustion performance of aluminum nanoparticles through decreasing critical ignition temperature, ignition delay time of the nanoparticles and promoting the ignition by exothermic chemical reactions between Al and Ni
Full-Text [PDF 5959 kb]   (907 Downloads)    
Type of Study: Research paper | Subject: Ceramics

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2016 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb