Volume 8, Number 3 (september 2011 2011)                   IJMSE 2011, 8(3): 17-22 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

A. A. Hosseini, A. Sadigzadeh, S. Mohammadi. FABRICATION AND CHARACTERIZATION OFHIGH PERFORMANCE CERAMIC MEMBRANE HAVINGNANOMETRE PORES. IJMSE. 2011; 8 (3) :17-22
URL: http://ijmse.iust.ac.ir/article-1-378-en.html

Abstract:   (5988 Views)
Abstract: In this study, carbon nanotubes (CNTs) were grown directly in the pores of micro porous pyrex membranes
and consequently ceramic membranes with very fine pores and high porosity were achieved. Our experiment was done
in two stages. Initially cobalt powder with different percent was homogeneously mixed with pyrex powder. In order to
produce row membranes, each of these mixtures were compacted in the form of tablet by use of a uniaxial cold press
and in a stainless steel mould, and then the tablets were sintered at different temperature in an electric furnace. In
second stage chemical vapor deposition (CVD) method was used to grow CNTs within the pores of the membranes.
Argon and ammonia were used as carrier and reactive gas respectively and acetylene was used as the carbon
feedstock. Morphology of the membranes before and after CVD process was studied by scanning electron microscopy
(SEM). After CVD process CNTs were grown in the pores of membranes and the pores size was decreased but total
porosity of the membrane was not changed considerably. In this way membranes with high porosity and fine pores were
fabricated.
Full-Text [PDF 1034 kb]   (1737 Downloads)    

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2016 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb