Volume 16, Issue 4 (December 2019)                   IJMSE 2019, 16(4): 20-26 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Ostovari Moghaddam A, Shokuhfar A, Cabot A. Ball Milling and Post Annealing as an Effective Route to Synthesize Co1-xCuxSbS Paracostibite Thermoelectric Material. IJMSE. 2019; 16 (4) :20-26
URL: http://ijmse.iust.ac.ir/article-1-1168-en.html
Abstract:   (1230 Views)
Metal sulfides containing non-toxic and earth abundant elements have emerged as new environmentally friendly thermoelectric materials. In the present work, a new, fast and large scale route to synthesise bulk nanostructured Co1-xCuxSbS paracostibite is presented. Stoichiometric compositions of Co1-xCuxSbS nanoparticles with 0 ≤ x ≤ 0.08 were first processed by high energy ball milling for 3 h, and then annealed at different temperatures between 400 ºC to 650 ºC for 1 h. The phase transitions and diffusion process during annealing were thoroughly studied by x-ray diffraction (XRD) and scanning electron microscopy (SEM). Agglomerated nanoparticles with sizes in the range from 40 nm to 80 nm were obtained after 3 h of ball milling, and remained below 100 nm after annealing and hot pressing. The thermoelectric properties of hot pressed samples, including the Seebeck coefficient (S), electrical conductivity (σ) and thermal conductivity (k), were measured from room temperature up to 723 K. All the samples exhibited a p-type semiconductor character at room temperature and underwent a transition from p-type to n-type conduction above 473 K. a maximum ZT value of 0.12 was obtained for Co0.06Cu0.04SbS4 at 723 K.
Full-Text [PDF 414 kb]   (222 Downloads)    

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2019 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb