Volume 16, Issue 2 (June 2019)                   IJMSE 2019, 16(2): 21-32 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Adineh M, Doostmohammadi H, Raiszadeh R. Effect OF SI and AL on the Microstructure, Mechanical Properties and Machinability of 65CU-35ZN Brass . IJMSE. 2019; 16 (2) :21-32
URL: http://ijmse.iust.ac.ir/article-1-1126-en.html
Abstract:   (1095 Views)
Relations between the microstructure, mechanical properties and machinability of as-cast 65Cu-35Zn brass with various amounts of Al from 0 to 4.72 and Si from 0 to 3.62 wt% were investigated. Both Si and Al initially enhanced the UTS and toughness of the brass samples, which led to improvement in machinability due to a reduction in the main cutting force. A duplex brass with random oriented α plates in β’ matrix was found to have the best machinability among the other microstructures. It was found that beside the presence of brittle phases, such as β’ phase in the microstructure, the morphology and hardness of the phases involved had significant influence on machinability.
Full-Text [PDF 1220 kb]   (329 Downloads)    
Type of Study: Research paper | Subject: Ceramics

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2019 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb