fa گروه سرامیک Ceramic Materials and Engineering Research Paper Research Paper In this investigation, &#945 2-D Finite Volume Method (FVM) with unstructured triangular mesh is developed to simulate the mould filling process. The simulation of fluid flow and track of free surface is based on the Marker And Cell (MAC) technique. This technique has capability ofhandling the arbitrary curved solid boundaries in the casting processes. In order to verify the computational results of the simulation, a thin disk plate with transparent mould was tested. The mould filling process was recorded using a 16mm high-speed camera. Images were analyzed frame by frame, in order to tracking of free surface and filling rate during mould filling. Comparison between the experimental method and the simulation results has shown a good agreement. Free surface, Finite volume method, SOLA,VOF, SOLA,MAC, Mold filling simulation 9 15 http://ijmse.iust.ac.ir/browse.php?a_code=A-10-1-23&slc_lang=fa&sid=1 BABAEI R. 1800319475328460055 1800319475328460055 Yes VARAHRAM N. 1800319475328460056 1800319475328460056 No DAVAMI P. 1800319475328460057 1800319475328460057 No SABZEVARZADEH A. 1800319475328460058 1800319475328460058 No