CV

  AWT IMAGE

  Professor F. Golestani Fard

 Department of Metallurgy and Materials Engineering

 Iran University of Science and Technology

 Narmak, Tehran,

 golestanifard@iust.ac.ir

  

  Education:

• PhD in Physics 1983

 Brunell University, London, U.K

• M.Sc in Ceramics (transferred directly to PhD) 1976

  Sheffield University, Sheffield, U.K

•  B. Sc in Metallurgical Engineering 1975

  Sharif Technical University, Tehran, Iran

  Employments:

• Professor and head of refractory division 1992-2008

• Iran University of Science and Technology

• Associate Professor and Head of Ceramic Department 1987-1991

• Materials and Energy Research Center, Iran

• Assistant Professor and Research Manager 1983-1986

• Materials and Energy Research Center, Iran

  Core Competencies and Research Interests:

•  Research and development on Ceramics/Refractories

• Lecturing in the field of Materials/Ceramics

• Industrial consultancy in Ceramic/ Refractory Technology

•  Scientific Journal Editorial/Executive Management

• International Scientific Cooperation Management

  Teaching Experience:

• Non-Oxide Ceramic Materials (647434)

• M.S. Ceramic Engineering

• Mechanical Properties of Ceramics (473225)

• B.Sc. Ceramic Engineering

• Advanced Materials Characterization and Analysis Methods (647433)

• M.S. Ceramic Engineering

• Refractories(472230)

•  B.Sc. Metallurgical Engineering

• Materials Science(434237)

• B.Sc. Mechanical and Industrial Engineering

  Thesis Supervised:

•  12 Ph.D. Students in Materials Engineering

• 56 M.S. Students in Ceramics Engineering

•  25 B.Sc. Students in Ceramics Engineering

  Sabbatical:

• Materials Department, Imperial College, UK, 2007

• Materials Department, Sheffield University, UK 1997

• Materials Department, University of Manchester, UK 1990

  Professional Activities:

• Editor in Charge Since 2003

  Iranian Journal of Materials Engineering

• Director, Office of International and Scientific Corporation

Iran University of Science and Technology Since 2004

• President, Iranian Ceramic Society 2003-2006

• Editor in Chief and Executive Manager 1995-1999

• International Journal of Engineering Science

• Research Deputy 1992-1993

 Department of Metallurgy and Materials Engineering, IUST

• Head of Ceramic Research Department 1987-1991

• Materials and Energy Research Center

  Current Projects:

• Improving the refractory matrix by nano materials

•  Development of spinel coating on graphite via modified sol-gel route

•  Manufacturing of ceramic fiber sprues for lost foam technology.

• Production of n-SiC ceramics for Al electrolysis pot.

•  Development of mold powder for application in steel industry.

• Study of spinel formation in AMC refractories in reduced atmosphere.

• Effect of TiO2 addition on Alumina Magnesia Carbon Matrix.

 Sample Publications:

 Invited Keynote Lectures and Conference Presentations:

  1- “New approaches to use nano additives in refractories to improve property/macrostructure characteristics”, 2th International Ceramic Congress, Verona, June 2008, Italy

  2- “Refractory market, research and education in Iran”, Indian Refractory Conference, Calcutta, Feb. 2008, India.

  3- “Characterization of MgAl2O4 spinel coated graphite with emphasis on refractory application”, 10th European Ceramic Society conference, Berlin, June. 2007, Germany.

 Journal Papers:

  1- M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H. R. Rezaei, “ Atmosphere snd carbon effects on microstructure and phase analysis of MgO-C refractories matrix”, journal of Ceramics International, (2008), (In press).

  2- A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, Development of MgAl2O4 spinel coating on graphite surface to improve its water-wettability and oxidation resistance”, journal of Ceramics International, (2008), (In press).

  3- A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, Improving the quality of nanocrystalline MgAl2O4 spinel coating on graphite by a prior oxidation treatment on the graphite surface”, Journal of European Ceramic Society, Vol. 28, (2008), pp. 2011-2017.

  4- A. Azhari, F. Golestani-Fard, “An investigation on mold powders properties consumed in Iran”, International journal of ISSI, Vol. 4, No. 1,2 (2007), pp. 50-54.

  5- Mehdi Mazaheri, A. Simchi, M. Dourandish, F. Golestani-Fard, “An Investigation on Densification of Nanocrystalline 3Y-TZP Using Master Sintering Curve”, Ceramics International, (2008), (In Press).

  6- R. Naghizadeh, H. R. Rezaei, F. Golestani-Fard, “Effect of antioxidants and atmosphere on the phase formation and microstructure of in situ MgO-Al2O3 spinels”, Defect and Diffusion Forum, Vols. 273-276 , (2008), pp. 542-548.

  7- A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, Chemical synthesis of nanocrystalline magnesium aluminate spinel via nitrate-citrate combustion route”, Journal of Alloys & Compounds,(2007), (In Press).

  8- M. Bavand-Vandchali, F. Golestani-Fard, H. Sarpoolaky, H. R. Rezaei, C. G. Aneziris, The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories”, Journal of European Ceramic Society, (2007), (In Press).

  9- H. R. Zargar, F. Golestani-Fard, H. R. Rezaei, The influence of nano boehmite on spinel formation in alumina-magnesia system at low temperature”, Journal of Ceramic Processing research, Vol. 9, No. 1, (2007), pp. 46-51.

  10- F. Golestani-Fard, S. Rowshanfekr, A. Shojaee, A. Azhari, A review of refractory production and demand in Iran”, Journal of Refractories Manual, Interceram, (2007), pp. 74-79.

  11- A. Ahmadi, H. sarpoolaky, A. Mirhabibi, F. Golestani-Fard, The effect of graohite addition on corrosion behavior of tar bonded dolomite refractories in steelmaking converter”, Iranian journal of Materials Science and engineering, vol. 4, Number 3 and 4, (2007), pp.28-38.

  12- A.A. Nourbakhsh, F. Golestani-Fard, H. R. rezaei,Influence of additives on microstructural changes in nitrid SiC refractories, Journal of European Ceramic society 26, (2006), pp. 1737-1741.

  13- A. R. Hanifi, A. Eilaghi, A. Salary, F. Golestani-Fard, W. L. Headrick, “Influence of covers on thermomechanical performance of steelmaking ladles”, journal of Refractories Applications Transaction, Vol. 2, No. 2, (2004), pp. 2-5.

 Journal Papers in Farsi

  1- A. Saberi, F. Golestani-Fard, H. Sarpoolaky, “ Formation of Spinel coating on Graphite surfaces via citrate-nitrate process”, Journal of Engineering Facaulty, Tehran University.(In press)

  2- N. Ebrahim, A. Saberi, A. Soori, M. Sharif, H. Sarpoolaki, F. Golestani-Fard, “Effect of amount of SiC on the corrosion behavior of Al2O3-SiC-C castable”, Journal of Engineering Facaulty, Tehran University, Vol. 40, no. 7, (2007), pp. 915-925

  3- A. Najafi, H. Sarpoolaky, F. Golestani-Fard, “ The effect of particle size on properties of Alumina-Spinel castable”, International Journal of Engineering Science, No. 4, Vol. 18, (2007), pp. 7-14.

 Conference Papers:

  1- A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, Characterization of MgAl2O4 spinel coated graphite with emphasis on refractory application”,10th European Ceramic conference, Berlin-Germany, (2007), 1920-1924 .

  2- F. Ariyanpour, F. Kazemi, F. Golestani-Fard, M. Rasti, Characterization of spent MgO-C refractory bricks with emphasise on recycling”, United International Technical Confrence On Refractories(UNITECR), Dresdon - Germany (2007), pp. 598-601.

  3- M. Mazaheri, A. Simchi, M. Dorandish, F. Golestani-Fard, “Master Sintering Curve for Nanoctystalline 3Y-TZP Powder Compacts”, 10th International European Ceramic Society Conference, Berlin-Germany, (June 2007).

  4- N. Ebrahim, A. Saberi, H. Sarpoolaki, F. Golestani-Fard, “Effect of amount of SiC on the physical, mechanical and corrosion behavior of Al2O3-SiC-C castable”, 49th International Feuerfest-Kolloquium on Refractories, Aachen-Germany, (2006), pp. 143-146.

 Books:

• “Materials Characterization and Analysis Methods”, Published by Iran University of Science and Technology, July 2004, Tehran, Iran,ISBN: 964-454-475-7.

• Proceeding of Tehran International Conference on Refractories, TICR04, editor, Published by Iran University of Science and Technology, April 2004, Tehran, Iran.

  Referrees

 • Prof. W. E. Lee

  Head of the Department of Materials

  Imperial College, South Kensington Campus, London, UK

  Tel: +44 (0)20 7594 6733

  Email: w.e.lee@imperial.uk 

• Prof. Michel Rigaud

  Department of Mechanical Engineering

  Ecole Polytechnique de Montreal

  B-450.7 , Ecole Polytechnique de Montreal, Montréal, Canada

  Tel: (514) 340-4711 ext. 4253

  Email: michel.rigaud@polymtl.ca 

 • Prof. George Oprea

  Ceramic Group of Metals and Materials Engineering Department

  University of British Colombia, Vancouver, Canada

  Tel: 1-604-822-2612

  Email: opera@interchange.ubc.ca 

•  Prof. G. Aneziris

  Department of Ceramics

  Freiberg University, Agricolastraße 17, Freiberg, Germany

  Tel: + 49 3731 39-2505

  Email: aneziris@ikgb.tu-freiberg.de 


View: 13438 Time(s)   |   Print: 3552 Time(s)   |   Email: 340 Time(s)   |   0 Comment(s)



CAPTCHA

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb