Volume 21, Issue 2 (June 2024)                   IJMSE 2024, 21(2): 1-10 | Back to browse issues page


XML Print


Abstract:   (4809 Views)
Modifying photo-anode structures in DSSC devices is still challenging in improving efficiency. This study focused on the ZnO rod growth on several porous silicon substrates using the hydrothermal method and determining which porous silicon is appropriate for DSSC applications. The materials used for the growth solution were Zn(NO3)26H2O 0.05 M and C6H12N4 0.25 M. The hydrothermal process was carried out at 90°C for 6 h and then annealed at 450°C for 30 min. SEM revealed that PSi pore influences the structure, diameter, and density of ZnO rods. ZnO structures formed in ZnO rods with a dominant vertical growth direction, ZnO rods with an intersection direction, and flower-like ZnO rods. The diameter of the PSi pore affected the density of ZnO rods grown on the PSi. The average diameter size and the density of ZnO rods vary from 747.66-1610.68 nm and 0.22-0.90 rod/μm2. XRD confirmed the presence of ZnO hexagonal wurtzite, Si cubic, and SiO2 monoclinic. UV-Vis spectrometry characterization results showed that sample reflectance was influenced by ZnO rod density and PSi pitch. The larger density of ZnO rods and the smaller pitch of the PSi pore will lead to lower reflectance. In addition, band gap values were obtained in the 3.06-3.75 eV range. FTIR identified the existence of a ZnO vibration bond, indicating that ZnO was successfully grown on all PSi substrates. The ZnO rods grown on P15S1180 are expected to have more appropriate properties among all five samples for DSSC photoanode.
Full-Text [PDF 1178 kb]   (1193 Downloads)    
Type of Study: Research Paper | Subject: Other subjects

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.