Volume 13, Number 1 (March 2016)                   IJMSE 2016, 13(1): 37-42 | Back to browse issues page



DOI: 10.22068/ijmse.13.1.37

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Sarjahani R, Sheikhattar M, Javadpour S, Hashemi B. THE EFFECT OF OPACIFIERS ON SURFACE ROUGHNESS OFCERAMIC GLAZES. IJMSE. 2016; 13 (1) :37-42
URL: http://ijmse.iust.ac.ir/article-1-785-en.html

Abstract:   (1928 Views)

Surface smoothness of ceramic glazes is always an important characteristic of ceramic glazes as a point of surface engineering studies. Surface roughness affects chemical resistivity, glossiness and stainabiliy of glazes. In fact, less surface roughness improves cleanability of the surface by the least usage amount of detergents. In this investigation, surface topography of two common opaque glazes, zirconia and titania-based, has been investigated. Crystallinity of the surface has been studied from SEM images, and comparison of EDS elemental results with phase analysis results of XRD. Surface roughness profile measured by Marsurf M300, shows that titania-based glaze is almost 24% percentage more smooth than zirconia based glaze. Surface smoothness is in relation with crystallinity of glaze surface, crystal type and crystal distribution in amorphous matrix phase

AWT IMAGE

Full-Text [PDF 577 kb]   (617 Downloads)    
Type of Study: Research paper | Subject: Ceramics

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2016 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb