Volume 1, Number 3 (Apr 2004)                   IJMSE 2004, 1(3): 9-15 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

KAVIANI S., MARASHI S. P. H.. TEM INVESTIGATION OF RAPIDLY SOLIDIFIED NDFEB HARD MAGNETIC MATERIAL. IJMSE. 2004; 1 (3) :9-15
URL: http://ijmse.iust.ac.ir/article-1-14-en.html

Abstract:   (19285 Views)
The surface condition and microstructure of near stoichiometric (Fe823Ndll.8B5.9) Nd-Fe-B alloy ribbons and the effect of melt spinning parameters were investigated using optical, scanning and transmission electron microscopes (SEM, TEM). The formation of gas pockets on the roll surface of the ribbons during melt spinning can prevent heat transform and result in local coarse grains. The local thickness would also be less in these places and thus perforates preferentially during ion beam milling. Therefore different areas of the sample should be carefully observed in the TEM. Reducing inert gas pressure in the chamber will eliminate the gas pockets. As a general trend, decrease in the ribbon thickness and mean Nd2 Fe14B grain size were observed on increasing the roll speed. By careful adjustment of the melt spinning parameters, the nanostructure will develop. An orientation relationship was found between Nd2 Fe14B and ^5-Fe precipitates for coarse grain samples melt spun at low roll speed. Dark field image of such grain also shows that some of these ^5-Fe precipitates have the same orientation. X-ray diffraction evident the development of texture by decreasing the roll speed.
     
Type of Study: Research paper | Subject: Ceramics

Add your comments about this article : Your username or email:
Write the security code in the box

© 2016 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb